160 Series Rear Mounted Blade

160 Series

The 160 Series Rear Blades is the ideal choice for heavy-duty grading chores around the farm such as road construction, terracing, dam building, cleaning out feed lots, and even snow removal.

These blades offer a choice of manual or hydraulic tilt, angle, and offset adjustments. Moldboard can be reversed for back filling. They are rated for use on a wide range of 2WD and 4WD tractors, depending on blade width.

With their heavy-duty construction, the 160 Series Blade is engineered and built to meet the most demanding conditions.

Place your mouse over the image to enlarge any portion of the product below.

NOTE: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.

Features

Performance Features
  • 160 Series is available in 8 ft & 10 ft. operating widths.
  • Tilt, Angle and Offset Adjustments
  • Reversible Cutting Edge
  • Standard Parking Stand
Construction Features
  • Tubular Construction
  • A Frame Construction
  • Heavy-Duty King Pins
  • Powder Coated Paint
  • Heavy-Duty Mainframe
  • High-Strength Reinforced Moldboard

Specifications

MODEL 160 SERIES
MOLDBOARD WIDTH 8 & 10 ft.
MOLDBOARD HEIGHT AND THICKNESS 18 in. x 1/2 in.
MOLDBOARD CUTTING EDGE 1/2 in. x 6 in.
HITCH 3-Pt. Cat. lI & III, Quick Hitch
APPROXIMATE WEIGHT 1339 lbs. (8 ft.), 1459 lbs. (10 ft.)
MAX. TRACTOR HP (PTO) 2-WHEEL DRIVE 8 ft. 190 HP, 10 ft. 160 HP
MAX. TRACTOR HP (PTO) FRONT WHEEL ASSIST 8 ft. 160 HP, 10 ft. 135 HP
KING PIN DIAMETER 4 in.
TILT ADJUSTMENT 15º up or down (manual or hyd.)
OFFSET ADJUSTMENT 37 in. left or right (manual or hyd.)
ANGLE ADJUSTMENT 45º left or right (in forward and reverse position, manual or hyd.)
SKID SHOES Optional
END PLATES Optional
PARKING STAND Standard
HYDRAULICS Optional
ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Our Companies