Pull Dirt Scrapers (DSP12)

Home Tractors & Equipment Bush Hog Attachments Construction Pull Dirt Scrapers Pull Dirt Scrapers (DSP12)

Pull Dirt Scrapers

DSP12

Bush Hog’s new DSP Line of Pull-Type Drag Scrapers, with standard fixed axle or optional tilt axle, is ideal for moving large quantities of material, leveling, and finish grading. The DSP12 units come available in 12’ widths. DSP scrapers equipped with the optional tilt axle can do everything the standard axle does, as well as remove material on an angle for sloping, terracing and ditching. Material can be transferred by dragging it to nearby locations and raising the scraper to deposit the load. Surfaces can be graded and leveled by scraping material from high areas and allowing accumulated material to flow under the grader blade into lower areas. The DSP scrapers are designed for 70 to 125 horsepower tractors and have replaceable wear plates on the sides.Place your mouse over the image to enlarge any portion of the product below.

NOTE: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.

Features

Performance Features
  • Available in 12-foot widths.
  • Optional tilt axle removes material on an angle for sloping, terracing and ditching.
  • DSP scrapers are designed for 70 to 125 horsepower tractors
  • Replaceable wear plates on the sides.

Specifications

Model DSP12
Horsepower Rating 70 to 125
Transport Width 145-inches
Working Width 144 3/16-inches
Capacity 2 3/4 cu. yds.
Weight without material in Weight Box
Tilt Axle 1700
No Tilt Axle 1580
Weight of Material in Weight Box 760
Depth of Box 39-inches
Maximum Cutting Depth 5-inches below grade
Dump Clearance 21-inches
Maximum Tilt Depth To the Right 8 1/4-inches
Maximum Tilt angle 3 1/2°
Tongue Construction 4-inches x 4-inches x 1/4-inch tubing
Side Plate Construction 3/8-inch x 24 5/16-inches high x 39 3/4inches deep
Moldboard Construction 1/4-inch x 24 1/4-inches high when formed
Cutting Edge 1/2-inch x 6-inches reversible & replaceable
Cutting Edge Reinforcement 3-inches x 3-inches x 5/16-inch angle plus a 1/4-inch mold board = 9/16-inch at the cutting edge.
Tires New 9.5l x 15 8 PLY RIB TL on Rim 5 with 5.5 BHC
Maximum Transport Speed 20 MPH
Lift Cylinder 3 1/2-inches x 8-inches ASAE
Tilt Cylinder 3 1/2-inches x 8-inches ASAE
Our Companies