100 Series Rear Mounted Blades

100 Series Rear Mounted Blades

100 Series

The 100 Series Rear Blades are the ideal choice for heavy-duty grading chores around the farm such as road construction, terracing, dam building, snow removal, and cleaning out feed lots.These blades offer a choice of manual or hydraulic tilt, angle, and offset adjustments. Moldboard can be reversed for back filling. They are rated for use on a wide range of 2WD and 4WD tractors,
depending on blade width.

With their heavy-duty construction, the 100 Series Blades is engineered and built to meet the most demanding conditions.

Place your mouse over the image to enlarge any portion of the product below.

NOTE: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.

Features

Performance Features
  • 100 Series is available in 8 ft. & 9 ft. operating widths.
  • Manual or Hydraulic Tilt, Angle and Offset Adjustments
  • Reversible Cutting Edge
  • Standard Parking Stand
Construction Features
  • Heavy-Duty Mainframe
  • High-Strength Reinforced Moldboard
  • Tubular Construction
  • A Frame Construction
  • Powder Coat Paint
  • Heavy-Duty King Pins
Product Features

Specifications

MODEL 100 SERIES
MOLDBOARD WIDTH 8 and 9 ft.
MOLDBOARD HEIGHT AND THICKNESS 17 in. x 3/8 in.
MOLDBOARD CUTTING EDGE 1/2 in. x 6 in.
HITCH 3-Pt. Cat. lI & III I Quick Hitch
APPROXIMATE WEIGHT 836 lbs. (8 ft.), 876 lbs. (9 ft.)
MAX. TRACTOR HP (PTO) 2-WHEEL DRIVE 8 ft. 125 HP, 9 ft. 95 HP
MAX. TRACTOR HP (PTO) FRONT WHEEL ASSIST 8 ft. 105 HP, 9 ft. 80 HP
KING PIN DIAMETER 3 in.
TILT ADJUSTMENT 15º up or down (manual or hyd.)
OFFSET ADJUSTMENT 30 in. left or right (manual or hyd.)
ANGLE ADJUSTMENT 45º left or right (in forward and reverse position, manual or hyd.)
SKID SHOES Optional
END PLATES Optional
PARKING STAND Standard
HYDRAULICS Optional
ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Our Companies