Our 83″ wide low-profile 14k bumper pull tilt deck is by far our most popular model. With two 5,200 or 7k Axles and tons of standard features, this model is a perfect fit for the contractor or weekend warrior. Go full tilt with your trailering. 7k brake axles and radial tires provide a solid foundation for each Iron Bull tilt trailer and ample grip for stopping power. Sherwin-Williams Powdura powder coat gives each trailer a rugged finish with a showroom shine.

USA made, lifetime recessed LEDs are provided by TecNic lighting. Each Iron Bull Trailer also comes equipped with a stake pockets, pipe spools and rub rail, removable diamond plate fenders, and adjustable coupler. Our 83″ wide 14k low-pro bumper pull is by far our most popular tilt deck model, perfect fit for work or play.

6″ Channel Tongue (8.2 lbs/ft)
2 – 5200 or 7000 Lb Torsion Axles
2 5/16″ Adjustable Coupler
Formed 3 x 3/16″ Channel Cross Members
20″ Deck Height
11 Degree Loading Angle
Knife Edge Tail
Removable Diamond Plate Fenders
Rub Rail and Stake Pockets
10k Drop-Leg Jack
4 Standard 3″ D-Rings
Radial Tires
E-Z Lube Hubs
3″ x 10″ Cylinder with 1.5″ Shaft
Cambered Torsion Axles
Multi-leaf Slipper Spring Suspension
Treated Pine Floor
Lifetime LED Lighting
All Lighting DOT Approved
Molded Sealed Harness with Resistors
7-Way Receiver Female Plug with Adapter
Sherwin-Williams Powdura Powder Coat

*Weight is approximate base model. Optional features will change
Attention: Due to supply chain issues some standard features are subject to change without notice. If a feature is of particular importance for you, please verify with your dealer prior to purchase.

Power Up/Power Down
Full Deck Tilt
102″ Wide Deck
Third Torsion Axle
Drive Over Fenders
12″ Crossmembers
14-Ply 235/85 Tire Upgrade
2-10K Jacks
Rough Oak Axles
Steel Floor
LED Backup Lights
Cold Weather Harness
Additional D-Rings
Front Tool Box
Weld On Spare Tire Mount
Bolt On Spare Tire Mount
1/2″ Winch Plate
Spare Tire
Our Companies