DSS2S/1L Heavy Duty Subsoilers

Heavy Duty Subsoilers

(HDSS2S and HDSS2L Series)

The new 3-point heavy duty subsoilers from Bush Hog® are the right tool for you when breaking up a hardpan developed over years of heavy use. Compacted soil can hurt you in two ways: plant roots cannot penetrate into the lower levels of the soil to tap additional nutrients and, in wet conditions, the excess water cannot drain away…both effects weaken your plants and reduce your yields. The new HDSS model subsoilers from Bush Hog® are available in four configurations, single or double shank with either short or long shank, capable of ripping the soil to depths ranging from 19 inches to 23 inches depending on the shank length. In certain areas, these subsoilers can be used to install water lines at depths suitable to get below the frost line. The beveled edge of the high carbon steel shank, combined with a heat-treated replaceable plow point, allow you to cut through the soil with minimal ground disturbance; shear pin protection is provided. When you need to go deep…the Bush Hog® HDSS subsoilers get the job done for you. Nothing beats a Bush Hog®!Place your mouse over the image to enlarge any portion of the product below.

NOTE: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.

Features

Performance Features
  • Cat. 1/2 Quick Hitch
  • Replaceable Bolted on Cutting Point
  • Depths ranging from 19 inches to 23 inches depending on the shank length.
  • Available in Major Tractor Colors
Product Features
  • Replaceable
    Heat-Treated
    Cutting Tip
  • Beveled Shanks
    Promote Easier
    Ground Penetration
  • Parking Stands
    are Standard

Specifications

MODELS HDSS2S HDSS2L
Description Subsoiler Heavy Duty 2 Shank Short Subsoiler Heavy Duty 2 Shank Long
Hitch Cat. 1/2 Quick Hitch
Overall width 49
Max Depth 23
Overall height 39 1/2 43 1/2
Weight 420 450
Horsepower Approximately 35 hp per shank up to 85 hp
Number of Shanks 2
Shank size 1 1/4” x 9 7/16” x 26 1/8”
Cutting Point 1” x 2 1/2” x 9 3/8”, Replaceable, Bolted On
Our Companies